Manual Straightening Presses
Round, spatially shaped, profiled, cast, soft or hardened:
With our manual straightening presses, you are able to process an extraordinarily wide range of workpieces.
Our sensitive straightening stroke control allows you to straighten efficiently and with repeatable accuracy.
Our experts train your operating personnel specifically for your machine.
On this page:
Manual straightening press P-H RH
Our series according to the motto: "Small but nice."
You are looking to start straightening relatively small workpieces, and you do need comparatively low forces for your straightening process?
Rely on our pneumatically driven manual straightening presses P-H RH, which nevertheless offer you the operating comfort and accuracy of our hydraulic presses with their sensitive straightening stroke control.
With the short video of the P-H RH, we present you another and short impression of the series. Ready?
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationAll videos are available on our Youtube channel.
Advantages:
- Compact, space-saving design
- Easy installation and commissioning, also possible by your own personnel
- Smooth running and ergonomics thanks to proven MAE. rotary hand lever
- Measuring and straightening take place in one clamping, therefore good cycle times can be achieved even with less experienced personnel
Product details:
- Straightening forces up to 160 kN
- Workpiece lengths from 30 mm
- Part cross-section from 3 to 60 mm
- Straightening accuracy up to 0.01 mm
Did you know...
…that on request we offer all our machines with an extended warranty?
Our machines come with a 12 months warranty. However, sometimes an extended warranty period is desired. This is not a problem for us at all!
We can also offer all our machines with 24 or 36 months warranty. In individual cases, even longer warranty periods are possible. Just contact us.
Manual straightening press S RH
Our series with upright press frame
Your workpieces to be straightened are large and/or require higher straightening forces? Then our S RH, the classic in our range of straightening presses, is the right solution for you. Their innovative and patented hydraulic system, already proven in our automatic straightening machines for decades, offers many advantages.
The video about S RH series, briefly shows different perspectives & features. Here we go:
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationAll videos are available on our Youtube channel.
Advantages:
- Significantly reduced energy consumption and maintenance effort
- Minimal heat generation, no cooling required
- Very low noise emission
- Optimal positioning repeatability
- Measuring and straightening take place in one clamping, therefore good cycle times can be achieved even with less experienced personnel
- We flexibly adapt the installation height or the projection of the press to your respective requirements
Product details:
- Straightening forces from 400 to 20,000 kN
- Workpiece lengths from 50 to 14,000 mm
- Part cross-section from 8 to 500 mm
- Straightening accuracy less than 0.01 mm
Straightening press comparison
 P-H RH |  S RH | |
|---|---|---|
Straightening forces | maximum 160kN | from 400 to 20,000 kN |
Workpiece lengths | from 30 to 1,250 mm | from 50 to 14,000 mm |
Part cross-section | from 3 to 60 mm | from 8 to 500 mm |
Straightening/ positioning accuracy | up to 0.01 mm | below 0.01 mm |
Measuring and straightening | take place in one clamping | take place in one clamping |
Operation / Training | no special training required | no special training required |
More features | Straightening stroke control: guarantees sensitive, repeatable work
For bend-straightening and pressure-straightening | Significantly reduced energy consumption
Very low maintenance requirements No cooling required due to minimal heat generation Very low noise emission Straightening stroke control: guarantees sensitive, repeatable work |
More automatic straightening?
Our automatic straightening machines
Our manual straightening presses cannot meet your requirements for cycle times and automation?
Then take a look at our automatic straightening machines with our powerful RICOS straightening control system:
A GESCO Group company